Used 4 gal HDPE White Square Bucket with Lid and Handle
Previously used in the food industry (held fruit puree)
Excelent for storing your bulk grain in.
NOTE: We can get 10 of these in one box
Our MiniHot Liquor tank has a one inch thread in the back about four inches above the bottom. This thread is designed for the addition of a heating element. We do not provide the element or controller. Hovever they can be purchased from your local hardware store. Included with purchase are 1/2" nickel platted ball valve, 2 barb fittings for 1/2" tubing, 1" thread with plug foor the element, thermometer thread and plug, sight glass and tank with lid plus two threads with screw in plugs one in the lid and one to the right of the valve. Gallon markings are on the side by the Teflon sight glass. The thermometer is sold separately. This tank makes grain brewing easy and fun!
Blichmann Engineering BREWMOMETER STAINLESS BI-METAL THERMOMETER
Unique Made-For-Brewing Dial Face
The unique patent pending dialface guides the brewer through the brewing process, helping to improve quality and consistency. The hermetically sealed glass face ensures long life. Large 3" dia. dial with low parallax stepped face, fine pointer, crisp large lettering, and custom made temp range means unparalleled accuracy!
The Brewmometer takes a stainless steel dial pot thermometer, and adds a face calibrated for everything from wort chilling to dough-in and protein rest, all the way up to sparge water and boiling. A very handy reference to use when mashing, boiling, or cooling. Features a 3" probe on the inside, and screws into a standard 1/2" female NPT fitting
Features a 60° to 220°F. range, 2° calibrations, a tempered glass lens, and a resetting screw, so you can precisely adjust the thermometer for a particular temperature range. Although heat resistant, it should not be allowed to contact open flame or come near open flame
Mashing/Boiling scale: 20º/120º C - 0º/250º F.
Our mash/boiling thermometer has a scale of 0 degrees to 250 degrees. The stem is 4 inches with a back connection of 1/2" threads. The face glass is anti-glare. The Calibration nut is on the back. The body is stainless steel.
This is a fermentation scale thermometer: The scale reads from 0º/55º C - 30º/130º F.
The thermometer is back connected with 1/2" threads. The stem is 4" with an anti-glare Face and a calibration nut on the back. The body is stainless steel.
The MiniMash Lauter / MASH Tun is a round, 15 gallon tank will hold up to 35 lbs of grain. Tank is 21 3/4" tall by 15" in diameter. 3/32" screen holes are ideal for a good filter bed. 5/16" thick walls provide mass for strength and good insulation. Transfers BTUs 100,000 times slower than stainless steel based on BTU transfer rate high-density polyethylene (HDPE). Sometimes a blanket or neoprene for insulation is needed.
False Bottom. The true bottom is 12 1/4? diameter and 1 3/4? deep. The size difference from the tank above forms a ledge inside. A stainless steel bolt is threaded through a center leg with a wing nut and washer to seal the screen in place tight against this ledge and the leg. The flat screen is great for lautering. It will not sag or allow grain to pass into the true bottom. The top of the bolt is an ideal depth measurement for stirring. Now it is easy to stir the grain without disturbing the filter bed.
Accurate Temperature Monitoring. Thermometer threads are strategically located for easy and accurate monitoring just above the screen and below the level of the center screen hold down bolt. Thermometer is sold separately.
Sight Glass. This design perfection is to assist in balancing the vacuum created when hot liquor flows out. The sight glass will also prevent channeling. When you know the liquid level you will know how recirculating (RIMs) is progressing or when to add hot liquor. With the MiniMash, the variables of mashing are under your control.
Extra Threads. Two extra 1/2" threads have been added to the back of the MiniMash. One at the top and one at the bottom below the screen for RIMs or any other creative ideas you may have. The top thread allows you to bypass the sparge head directly into the top of the grain bed. The extra lower thread can be used for specific gravity and pH testing.
Partial Grain Brewers. Extract brewers can add a little specialty grain and flavor with the MiniMash Lauter Tun.
Recipe Size. Designed for both 5 and 10 gallon recipe size brewers. Will hold up to 35 lbs of grain
Making Extract. Take the big step and make your own extract. The choice represents more opportunities for great tastes and fun. The MiniMash Lauter Tun was designed and developed by brewers concerned about efficiency, taste and repeatability.
Ships Ready to Mash. Just clean, warm, start your mash - sparge when ready - enjoy the new flavors and challenge.
The Minibrew minmash sparge arm is 12 inch long and rotates on a Delrin washer. The two plastic bolts are easily removed from the ends of the tube for cleaning. A two foot water drop is all the horsepower needed for rotating the arm. Designed for the MiniMash Lauter Tun
Use to reduce tubing size from 1/2 inch to 3/8 inch. This fitting is barb connected on both ends.
Able to withstand boiling temperatures
They are made from nylon and melt at 250 degrees
so avoid direct flame exposure.
HomeBrew4Less.com LLC, 890 Lincoln Way
W, Chambersburg, PA 17202
(717) 504-8534
Store Hours Tue to Sat 11:30 am to 5:30 pm
Telephone Support 8 am to 8 pm
*** We only ship within the United States. ***
The American Homebrewers Association (AHA) is committed to promoting the community of homebrewers and empowering homebrewers to make the best beers in the world. Join today!
