Quick Disconnect Hose Connector - Female
With these quick disconnect, life is easier and safer. No buttons to press, just turn and pull or push and turn. All fittings are 1/2" barb or thread.
They do not have any shutoff feature, so no fluid should be in your lines when breaking connections
Able to withstand boiling temperatures
They are made from nylon and melt at 250 degrees
so avoid direct flame exposure.
Recomended on equipment side of connection
Mates With item HBQCM
Quick Disconnect Hose Connector - Male
With these quick disconnect, life is easier and safer. No buttons to press, just turn and pull or push and turn. All fittings are 1/2" barb or thread.
They do not have any shutoff feature, so no fluid should be in your lines when breaking connections
Able to withstand boiling temperatures
They are made from nylon and melt at 250 degrees
so avoid direct flame exposure.
Recomended on hose side of connection
Mates With item HBQCF
Electric Brew Heater w/ 15" Element
Unlike gas burners, the Electric Brew Heater provides portable, precisely adjustable heat for boiling and mashing without the need for venting. It fits in a boiling pot, sparge water tank, or mash tun, and can be used for both wort boiling and mashing. This 110 volt heater features an adjustable thermostat controlling a 2,200 watt stainless steelclad heating element, and is capable of bringing 5 gallons to a fume-free boil in just under one hour. Handy for boiling wort when a gas stove is not practical, and ideal for use as a compact sparge water tank heater or mash tun heater when you want something small and adjustable to complete your mashing system.
Comes in an 11" and 15" lengths to fit different pots and applications. The 11" size is designed to fit our 30 and 32 quart pots for boiling, while the 15" length fits 10 gallon Igloo cooler mash tun conversions (do not boil in an Igloo or you will melt it), and also perfectly fits the Polar Ware 10 gallon Brew Pot and other pots that are 15" to 18" deep.
Fully adjustable thermostat has an infinite adjustment that lets you set the temperature from 120° F to 212° F. An indicator light turns on when the element is on, so you can make precise adjustments. The heating element and down tube are both constructed of stainless steel, for years of use without corrosion. An external thermometer is needed when mashing or for setting sparge water tank temperature.
BUCKET NOT INCLUDED
Five Star Acid #5 Conc. Nitric/Phosphoric Blend --- 1 Gallon
Acid Cleaner # 5 is great to Passivates and Brightens Stainless Steel
Initial Acid Passivation: After cleaning vessel with alkali cleaner use 5 ounces of ACID CLEANER #5 per
gallon of water. Circulate for 20 minutes at 120°F. Drain vessel and ALLOW TO AIR DRY. The vessel must air
dry to achieve successful passivation. (Before using vessel, it is required to rinse with potable water and
sanitize according to public health standards.)
Re-passivation: Use 1 oz. per gallon of water and circulate for 30 minutes at 120°F. ALLOW TO AIR DRY.
(Before using vessel, it is required to rinse with potable water and sanitize according to public health
standards.)
Note: Sensitive alloys may require milder concentrations.
Tech sheet and instructions
http://www.fivestarchemicals.com/tech/acid5.pdf
BLICHMANN QUICK CONNECTOR KIT 3/8" PKG OF 2
Quick Connector stainless swivel fittings. 1/2" NPT x 3/8" hose barb fitting Sold in sets of two fittings. For the Therminator. or Hop Rocket
BALL VALVE, 1/2FPT X 1/2FPT FP (SS)
STAINLESS BALL VALVE
1/2" Female Pipe Thread x 1/2" Female Pipe Thread
Precise metering of gas & liquids.
A good, inexpensive alternative to commercial grade 3-piece units AND a better alternative to foreign made (cheap) units sold on forum sites and other shops!
Precision machined in the USA!
FEATURES:
* These are full port stainless steel ball valves with a two-piece body.
* Each end of the valve has female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F with pressure under 1000 psi.
* All internal contact points (body, ball, cap and stern) are 316 stainless steel, all other metal parts are 304 stainless.
* Seat and washers are PTFE (teflon).
Stainless False Bottom Screen (10'')
Stainless steel perforated material (3/32 holes on 5/32 centers) used when converting kegs to mash tuns. Comes with 1/2" diameter hole in the middle. Completely flat.
Siphontap
A tool designed to rack (transfer) cooled wort from the kettle into the fermenter. The Siphontap strains a significant amount of hops and trub. After transfer is completed, there is just enough wort left in the bottom of the Siphontap to allow a hydrometer reading. Just insert the Siphontap into your wort and one gentle push starts the flow. It works great with the Siphon Spray Aerator on the other end of the transfer hose inside the fermenter. For use with 3/8 in ID turing.
HomeBrew4Less.com LLC, 890 Lincoln Way
W, Chambersburg, PA 17202
(717) 504-8534
Store Hours Tue to Sat 11:30 am to 5:30 pm
Telephone Support 8 am to 8 pm
*** We only ship within the United States. ***
The American Homebrewers Association (AHA) is committed to promoting the community of homebrewers and empowering homebrewers to make the best beers in the world. Join today!
