Screw on to the gallon jar for perfect sealing and never pops ups.
Replaces the bung for a 1 Gallon Jar.
Cap with molded hole to accommodate both our Double Bubble Airlock and Three (3) Piece Fermentation Lock.
NOTE SIZE 38 MM SCREW CAP
VERY EASY TO CLEAN.
CAP ONLY, Airlock not included
Nice food grade plastic primary fermenter with snap on (not airtight) lid. Great for fresh fruit wine making and larger batches of beer. Gives you room to stir things up! 10 gallon capacity (when filled to top rim). Designed for primary fermentation stage of wine and beer making. No airlock hole in lid and should not be required in the primary fermentaion stage. Weighs about 5 lbs but ships at 70 lbs oversize per UPS rules. (If other items are ordered at the same time that will fit inside the fermentor, actual freight charges may be reduced and we will issue a credit for any overcharges as per our honesty in freight charge policy)
20 Gallon Primary Fermenter And Lid
Nice food grade plastic primary fermenter with snap on (not airtight) lid. Great for fresh fruit wine making and larger batches of beer. Gives you room to stir things up! 20 gallon capacity (when filled to top rim). Designed for primary fermentation stage of wine and beer making. No airlock hole in lid and should not be required in the primary fermentaion stage. Weighs about 8 lbs but ships at 70 lbs oversize per UPS rules. (If other items are ordered at the same time that will fit inside the fermentor, actual freight charges may be reduced and we will issue a credit for any overcharges as per our honesty in freight charge policy)
Blichmann Engineering 7 GALLON FERMENATOR - Standard Fittings
Fermenator all-stainless steel conical fermenters eliminate the need to transfer beer or wine from a primary to a secondary. You can dump trub and yeast sediment without transferring the beer, easily sample the wort, harvest yeast, and, unlike simple conicals, the rotating racking arm lets you siphon out completely sediment free beer.
The Fermenator features a completely smooth, weld-free interior that eliminates the possibility of welding cracks or pits harboring bacteria. The leg mounting bolts are welded to the outside of the cone, with an exclusive welding process that leaves no trace on the smooth interior. In addition, the Fermenator features weld-free removable stainless steel fittings and valves, sealed by an easily replaceable O ring (several spares included). Unlike welded-on fittings, all parts can be removed and soaked in iodophor sanitizer between batches for a very thorough cleaning.
All Fermenators features a sturdy stainless lid with a seal that withstands up to 7 psi for C02 pumping of the beer, very handy when you want to get your beer out of a chest freezer. One person can lift the this 7 gallon Fermenator (for 5 gallons of wort). The lid is solid stainless steel, with a secure silicone sealing gasket , and adjustable lid tension for positive sealing. The lid features an airlock hole that fits a #7 stopper (airlock and stopper included). An exclusive access hatch is also included in the lid, letting you add dry hops, finings, or fruit without removing the entire cover. Optional leg extensions allow you to elevate the Fermenator for easy keg filling. The standard legs feature plastic pads to avoid scratching counter tops and refrigerators.
The exclusive low profile Fermentor design avoids unnecessary protrusions, and is made to fit in standard refrigerators easily. See the dimensions at right to see how much refrigerator space you will need. Get a spare refrigerator and a external Controller to make a temperature-controlled fermenter at an economical price. We believe the Fermenator offers the best value in a no-compromise, high quality conical fermenter. Everything needed is included, and all components are of food grade stainless steel. Nylon hose barbs are included to adapt both valves to 3/8” or 5/16” diameter tubing.
This 7 gallon size fits into a refrigerator that is 17" wide, 16" deep, and 29" tall. The exclusive swing out handles make the Fermentator line of conical fermenters the lowest profile in the industry.
Use this handy controller to regulate the temperature in your refrigerator or freezer between 20 - 80F. Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the Controller will allow a usable range of 37 to 80 F.(due to refrigerator limitations), while on freezers, the controller will be able to reach its full 20 to 80 range. *Keep in mind that if you use it to control a refrigerator, you will lose the use of the freezer compartment for food storage, as it will not stay cold enough for safe frozen food storage. In stock and ready to ship. Features: Made of stainless steel. Adjustable with the turn of a knob. No Drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8"H x 2 1/8"W x 1 1/2"D. Cord dimensions: 6'. Remote sensor bulb: 5 1/2"W. Remote sensor bulb capillary tube: 6'. Temperature range: 20 - 80F. Voltage: 120 VAC. . . Includes: Chain hanger kit. Instructions.
Great for turning a chest freezer into a keg refrigerator.
Easy to set up and use.
Plug unit into wall and then run the sensor into your freezer.
Temperature range: 20 - 80F.
Easy to adjust with a quick turn of the dial.
Product Details:
Package Length: 11.0 inches
Package Width: 5.0 inches
Package Height: 3.0 inches
Package Weight: 3.0 pounds
This is a fermentation scale thermometer: The scale reads from 0/55 C - 30/130 F.
The thermometer is back connected with 1/2" threads. The stem is 4" with an anti-glare Face and a calibration nut on the back. The body is stainless steel.
Quick Disconnect Hose Connector - Female
With these quick disconnect, life is easier and safer. No buttons to press, just turn and pull or push and turn. All fittings are 1/2" barb or thread.
They do not have any shutoff feature, so no fluid should be in your lines when breaking connections
Able to withstand boiling temperatures
They are made from nylon and melt at 250 degrees
so avoid direct flame exposure.
Recomended on equipment side of connection
Mates With item HBQCM
Quick Disconnect Hose Connector - Male
With these quick disconnect, life is easier and safer. No buttons to press, just turn and pull or push and turn. All fittings are 1/2" barb or thread.
They do not have any shutoff feature, so no fluid should be in your lines when breaking connections
Able to withstand boiling temperatures
They are made from nylon and melt at 250 degrees
so avoid direct flame exposure.
Recomended on hose side of connection
Mates With item HBQCF
HomeBrew4Less.com LLC, 890 Lincoln Way
W, Chambersburg, PA 17202
(717) 504-8534
Store Hours Tue to Sat 11:30 am to 5:30 pm
Telephone Support Tue to Sat 11:30 am to 5:30 pm
*** We only ship within the United States. ***
The American Homebrewers Association (AHA) is committed to promoting the community of homebrewers and empowering homebrewers to make the best beers in the world. Join today!
