|
|
|
| ACCOUNT INFO | ||||||
|
|
| Home > Beer Related > Beer Kits (Ingredient) > Homebrew4Less All Grain Kits > High Gravity Ale Kits (All Grain) |
Home Kegging Cleaning Kit with Pump and Solution |
| Detailed Description |
| Home Kegging Cleaning Kit with Pump and Solution CLEANING KIT, HAND PUMP Pump action for powerful cleaning of your beer tap lines. You should clean your lines every two to three kegs. All the cleaning solution, tools and brushes you need to professionally clean your beer lines. Plastic pump bottle forces cleaning solution through the tap lines for better tasting beer. Includes: One quart of Superflush cleaning solution, on double ended brush, one wrench and one plastic pumping bottle with high quality hose, fitting and hand pump. Item FE20D03189 Home Kegging Cleaning Kit with Pump and Solution instructions: To keep your system operating efficiently it should be cleaned every two to three kegs. Your kit contains everything you will need to thoroughly clean your system. STEP 1: Remove faucet from shank and dismantle it completely. Soak parts in warm water with 1 capful of the cleaning solution. Use your faucet brush to scrub out the inside of the faucet body. RINSE THOROUGHLY. Reassemble faucet just tight enough to eliminate leakage. Using the small end of the brush, run it through the shank several times to loosen any build-up. STEP 2: Put 1 capful of the cleaning solution in the jar then fill with water. Attach the hose coining out of the jar to the shank. Place tap in a bucket (in the tapped position) and pump the cleaning solution through the line and tap. Rinse with 1 to 2 jars of clear water. STEP 3: Reattach the faucet to the shank, snug down just tight enough to eliminate leakage, a wrench is included to help you make this connection. CAUTION: Do not over tighten this connection or you will ruin the washer in the faucet. Re-tap the keg and you're ready to go. |
| Recently Viewed Items | ||||||||||
| ||||||||||
