DEPARTMENTS

ACCOUNT INFO

VIEW BASKET

ACCOUNT INFO

REQUEST CATALOG

ADDRESS BOOK

Home > MiniBrew > MiniBrew Conical Fermenters

Three reasons why small batch brewers and wine makers buy Minibrew fermenters: Less work, less expensive, and more fun.

Page 1 | 2

Item #

Image

Description

Price

HBQCM

Quick Disconnect Hose Connector - Male 1/2 Inch

Quick Disconnect Hose Connector - Male With these quick disconnect, life is easier and safer. No buttons to press, just turn and pull or push and turn. All fittings are 1/2" barb or thread. They do not have any shutoff feature, so no fluid should be in your lines when breaking connections Able to withstand boiling temperatures They are made from nylon and melt at 250 degrees so avoid direct flame exposure. Recomended on hose side of connection Mates With item HBQCF

In Stock

HBRU

Co2 Injector Lid Connection For Mini Brew Fermentors

CO2 Injector lid connection for Mini Brew fermentors This is the connection you need if you would like to supply your own CO2 bottle or use our MiniInjector Kit for covering you wine with CO2. Remember you will not need to 'top off' the tank or buy a 'floating lid' for your fermenter if you use our kit or supply your own CO2 or nitrogen (N) bottle. The CO2 or N protects the wine from bad bacteria. The fitting size for the plastic reducer is 1/2 inch MPT to 1/4 inch NPT. The brass union is 1/4 inch MFL and 1/4 NPT.

In Stock

HBH4

Miniquick Connect 1/2" Hose Per Foot

MiniQuick Connect 1/2" Brewing Hose per Foot The new MiniQuick Connect is a hose system designed to make brewing easier and safer. One of the most susceptible areas for infection are hoses. The other and maybe more important issue is trying to connect hoses to a kettle, fermenter, mash tun, bottling line, etc. With our new quick disconnect, life is easier and safer. No buttons to press, just push and turn or turn and pull to connect or separate. The price is quoted per foot. Select the quantity to determine how many feet you would like to order. The number you enter is the number of feet of hose you will receive. Please Note: This item is 1/2-inch hose only WITHOUT fittings

In Stock

HBF25

Minibrew 25 Gallon Conical Fermenter

Minibrew 25 Gallon Conical Fermenter The fermenter ships ready to brew and is our best design for 10 gallon recipes. Included are a 1" nickel plated bottom ball valve, 1/2" nickel plated racking port ball valve, lid, stand plus three 1/2" screw in plugs. There are two threads in the lid and one below the label for a thermometer. The thermometer is not included. The plastic is a full 5/16" thick. The fermenter is 44 1/2" tall x 18 3/4" wide. Ships in one oversize box

In Stock

HBN1

Nipple 1 inch (threaded pipe)

Nipple 1 inch (threaded pipe) This one inch nipple connects the one inch ball valve to the apex of conical on the f8 gallon and larger fermenters.

In Stock

HBN12

Nipple 1/2 inch (threaded pipe)

Nipple 1/2 inch (threaded pipe) The 1/2 inch nipple is used to connect the 1/2 inch ball valve to the racking port on all of our fermenters. It is also used to connect the valves on the MiniMash Lauter Tun (mt15) and on our MiniHot Liquor Tank (hlt15).

In Stock

HBN34

Nipple 3/4 inch (threaded pipe)

Nipple 3/4 inch (threaded pipe) The 3/4 inch nipple is used to connect the 3/4 inch ball valve on the Affordable Conical fermenter(f6.5) to the apex of the conical.

In Stock