DEPARTMENTS

ACCOUNT INFO

VIEW BASKET

ACCOUNT INFO

REQUEST CATALOG

ADDRESS BOOK

Home > Draft Beer Equipment > Draft Systems > Nitrogen Draft Systems

Item #

Image

Description

Price

BC1573-1

Brush, Double Faucet, 3/4" & 1/2" Ends

Faucet Brush, Double , 3/4" & 1/2" Ends This versatile faucet brush makes it easy to scrub your draft beer parts with both 3/4” and 1/2” diameter bristle heads! We must admit, the name isn’t entirely accurate. It might be better to call it a plain old beer brush, seeing as it’s also great for cleaning your couplers, the inside of most shanks and even European faucet spouts. Features * Two bristle heads for more versatility * Great for cleaning faucets, couplers and the inside of shanks Specs * Bristle heads: 3/4” and 1/2” Diameter

In Stock

FX20D03189

Home Kegging Cleaning Kit with Pump and Solution

Home Kegging Cleaning Kit with Pump and Solution CLEANING KIT, HAND PUMP Pump action for powerful cleaning of your beer tap lines. You should clean your lines every two to three kegs. All the cleaning solution, tools and brushes you need to professionally clean your beer lines. Plastic pump bottle forces cleaning solution through the tap lines for better tasting beer. Includes: One quart of Superflush cleaning solution, on double ended brush, one wrench and one plastic pumping bottle with high quality hose, fitting and hand pump. Item FE20D03189 Home Kegging Cleaning Kit with Pump and Solution instructions: To keep your system operating efficiently it should be cleaned every two to three kegs. Your kit contains everything you will need to thoroughly clean your system. STEP 1: Remove faucet from shank and dismantle it completely. Soak parts in warm water with 1 capful of the cleaning solution. Use your faucet brush to scrub out the inside of the faucet body. RINSE THOROUGHLY. Reassemble faucet just tight enough to eliminate leakage. Using the small end of the brush, run it through the shank several times to loosen any build-up. STEP 2: Put 1 capful of the cleaning solution in the jar then fill with water. Attach the hose coining out of the jar to the shank. Place tap in a bucket (in the tapped position) and pump the cleaning solution through the line and tap. Rinse with 1 to 2 jars of clear water. STEP 3: Reattach the faucet to the shank, snug down just tight enough to eliminate leakage, a wrench is included to help you make this connection. CAUTION: Do not over tighten this connection or you will ruin the washer in the faucet. Re-tap the keg and you're ready to go.

In Stock

FX20G09209

Superflush Line Cleaning Solution - 32 oz Concentrate

Superflush Line Cleaning Solution - 32 oz Concentrate LINE CLEAN, SUPERFLUSH (1 QT) A mild cleaner designed for cleaning beer lines. WORKS GREAT FOR CLEANING PARTS TOO! Same high quality product that comes with our hoembrew cleaning kit. Concentrated, use 2-3 oz per gallon of water for cleaning. Biodegradable and safe to use. 32 oz makes up to 16 gallons of line cleaning solution.

In Stock

FX15D03005

Ball Lock Corny keg gasket kit

BALL LOCK KEG O-RING KIT Keep your kegged beer fresh with these rubber replacement O-rings for ball lock plugs on your homebrew kegs. O-rings keep your homebrew keg sealed for the best quality brewing. Each kit includes five O-rings. Features: Easily replace old O-rings on your homebrew keg. Keeps your keg sealed for fresh tasting beer. This O-ring set has all the gaskets you will need to refurbish a used Cornelius keg. Most Corny kegs have been used for soda and should have all gaskets replaced, as the soda flavor cannot be removed from the rubber. Fits all brands of ball lock tanks. Ball Lock Corny keg gasket kit

Check for Availability