DEPARTMENTS

ACCOUNT INFO

VIEW BASKET

ACCOUNT INFO

REQUEST CATALOG

ADDRESS BOOK

Home > Beer Equipment > Plumbing Fitting and Parts

A vast collection of fittings and parts for your brewery

Page 1 | 2

Item #

Image

Description

Price

FX04C07118

BALL VALVE, 1/2FPT X 1/2FPT FP (SS)

BALL VALVE, 1/2FPT X 1/2FPT FP (SS) STAINLESS BALL VALVE 1/2" Female Pipe Thread x 1/2" Female Pipe Thread Precise metering of gas & liquids. A good, inexpensive alternative to commercial grade 3-piece units AND a better alternative to foreign made (cheap) units sold on forum sites and other shops! Precision machined in the USA! FEATURES: * These are full port stainless steel ball valves with a two-piece body. * Each end of the valve has female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F with pressure under 1000 psi. * All internal contact points (body, ball, cap and stern) are 316 stainless steel, all other metal parts are 304 stainless. * Seat and washers are PTFE (teflon).

In Stock

FTH117

Hinged False Bottom For Keg 13" diameter, hinged

Hinged False Bottom For Keg This 13" diameter, hinged, stainless false bottom will cover the entire concave bottom of a Sanke style keg. Stainless hinges (welded to the perforated stainless) allow the screen to be folded in half for easy placement and removal. Made of 18 gauge stainless, without legs. Typically used by brewers who are draining from the bottom of the keg (there is not hole in the center for a drainage tube.) See product our, FTH110 Stainless Screen (10 in.) - Flat, for a screen with hole. Or our FTWL131 Weldless Mash Keg conversion - Stainless or FTWL210 Welded Mash Conversion - Stainless for options for draining kegs through a valve on the side instead of the bottom.

In Stock

FTBE500

Siphontap

Siphontap A tool designed to rack (transfer) cooled wort from the kettle into the fermenter. The Siphontap strains a significant amount of hops and trub. After transfer is completed, there is just enough wort left in the bottom of the Siphontap to allow a hydrometer reading. Just insert the Siphontap into your wort and one gentle push starts the flow. It works great with the Siphon Spray Aerator on the other end of the transfer hose inside the fermenter. For use with 3/8 in ID turing.

In Stock

FTH985

Tubing - Silicone (1/2" ID) - By the Foot

Tubing - Silicone (1/2" ID) - By the Foot Translucent, food-grade tubing temperature rated to 500F. Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. It is kink resistant and will not delaminate. This tubing is not designed to hold pressures above 20psi. It works great with our magnetic drive pumps, but we do not recommend it with a impeller pump or for use with household water pressure. 1/2" ID * 3/4" OD * Will burst at 30 PSI at 70F. 1/2" ID 3/4" OD 30 PSI Burst at 70F This also often spelled as Silicon Tubing without the e.

In Stock

FTH928

HI Temp O-ring for weldless valve kits

HI Temp O-ring for weldless valve kits High temperature o-ring for our newest weldless valve kits that require only one o-ring. O-ring measures 3/4" ID, and 1 1/4" OD.

In Stock

FTBE510

Siphon Spray Wort Aerator

Siphon Spray Wort Aerator Increase dissolved oxygen in your wort without having to rock or shake a heavy fermenter. Attach this aerator/diffuser to the end of your transfer tubing when filling your fermenter. Works well by itself or in conjunction with the FXBE500 Siphontap.

In Stock

BEBV12

Ball valve - 3pc 1/2 NPT 304 stainless steel

Ball valve - 3pc 1/2" NPT 304 stainless steel BLICHMANN ENGINEERING 3 piece ball valves are easy to take apart and clean. These valves are 304 stainless steel, full port with 1/2"NPT threads. The seals are made of Teflon to resist high temperatures. Comes with a locking handle to prevent accidental opening. 1/2" NPT 304 stainless steel

In Stock

BEBV14

Ball valve - 3pc 1/4 NPT 304 stainless steel

Ball valve - 3pc 1/4" NPT 304 stainless steel BLICHMANN ENGINEERING 3 piece ball valves are easy to take apart and clean. These valves are 304 stainless steel, full port with 1/4"NPT threads. The seals are made of Teflon to resist high temperatures. Comes with a locking handle to prevent accidental opening. 1/4" NPT 304 stainless steel

In Stock