March High Temperature Brewing Pump - High Flow
H315HF

This pump replaces our H315. On the outside it looks like the old favorite, but some internal tweaks have improved performance.

The new model comes with all the great features of the original - magnetic drive, handles flow restriction, okay for boiling temperatures, 6' cord with plug, food-grade materials in contact with the liquid, 1/2" ports, etc. - but now features a different slightly higher flow rate with less issues of cavitation.

The magnetic drive in a March pump acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it is not self-priming, you must put the pump under the level of the liquid source.

Features List
# Included bracket for mounting
# 6' power cord with plug wired in for easy use
# Maximum flow of just over 7 gpm (at zero head)
# Maximum head of 18 feet (at zero flow)
# 1/2" mpt fittings on both inlet and outlet.
# Materials in contact with solution: Polysulfone, 316 stainless steel, silicone rubber, Ryton and Teflon
# 1/25 hp, continuous-duty, thermal overload protected, single phase 1.4 Amp motor
# Motor is fan cooled
# Will handle internal pressures to 50 psi.
# Face unscrews and rotates at 90 degree intervals to adjust to your application.

Addtional Notes To restrict flow place a ball valve on the out flow of this pump.

The Fermentap Weldless Spigot is made of 100% stainless steel, ensuring it will be used in your brewing for years to come. It features a 1/2" Full Port ball valve and a 1/2" barb.

A full coupler has been added in the back of the spigot to allow for the addition of any 1/2" Male NPT fitting you need - barb, Compression fitting, etc.

Item requires a 7/8" drill bit to install.

Kit’s Includes:
1) 1/2 in. npt x 1/2 in. Barb
2) Ball Valve - 1/2 in Full Port
3) Nipple
4) HI Temp O-ring
5) Washer
6) Full Coupler (1/2")

Weldless Cooler Kit (Stainless)

Replace the standard push-button type spigot on a Rubbermaid cooler with this sturdy ball valve. No modifications to the cooler are necessary - simply remove the old spigot, install the kit in the stock hole, and tighten the coupler on inside of cooler. Allows you to use cooler as a mash tun or hot water tank. 3/8" outlet barb is perfect for directly attaching tubing to perform transfers. Ball-Valve and all hardware is made from stainless steel and sealing o-ring is made from high-temp, food-grade rubber.

This is for replacement of Rubbermaid Cooler's stock spigots only.

Weldless Mash Keg Conversion - Stainless

The Fermentap Weldless Mash Keg Conversion Kit is a great way to turn that 15.5 gallon keg you have into an efficient mash tun, or as a very effective whole hop filter in your boil kettle! This kit features 100% stainless steel metal parts, and the gaskets used are made from high temp. and food-grade materials.

The ball valve is 1/2" Full Port, so your wort can flow through unrestricted, if you wish. On the backside of the ball valve is a stainless pick-up tube, which allows for the collection of the wort underneath the 10-inch diameter mash screen. This way, you get maximum yield from your mash tun.
Requires a 7/8" drill bit to install.
Comes with 1/2 inch barb fitting.