INSTRUCTIONS FOR RAINBOW HOMEBREW SODA
Two
2-liter QUICK START recipe
Sprinkle 1/8 teaspoon
dry yeast (Red Star preferred) in 6-oz. of warm water. Let sit undisturbed for 15 minutes then stir gently to
thoroughly dissolve. While waiting for the yeast to dissolve, shake
extract bottle well, mix 2-1/4 cups of sugar and 1 tablespoon of soda extract in
1 gallon of lukewarm water. Mix until sugar is completely dissolved, then add
yeast mixture stirring well. Pour 1/2 of this mixture in each 2 liter soda
bottle and top off each one with plain water to within 1 1/2 to 2 inches of top. Attach
a resealable cap and shake well. Store bottles at room temperature,
preferably between 70 and 75 degree F for 4 to 6 days. You can tell by the firmness of the bottle how your carbonation is
coming along. Move to cooler area if possible for another week of aging.
When fully carbonated and aged the bottle should be just about as hard as a
glass bottle. At this point chill thoroughly for 24 - 48 hours before opening
and enjoying.
Guidelines for other Rainbow homebrew soda amounts are listed
below:
|
|
AMOUNT
TO BE
MADE |
YEAST |
EXTRACT
(adjust to taste) |
SUGAR
(full 8 oz, measuring cups) |
WATER |
|
Two 8
oz. measuring |
1 GALLON |
1/8-1/4 tsp. |
1 Tbsp. or
1/2 oz. |
2 Cups |
Fill to 1 Gal. |
|
cups = 1 Ib. sugar |
2 GALLON |
1/4-1/2 tsp. |
1 oz. or
1/2 Bottle |
4 Cups |
Fill to 2 Gals. |
|
|
4 GALLON |
1/2-1 tsp. |
1 Bottle |
8 Cups |
Fill to 4 Gals. |
BATCHES SHOULD ALWAYS BE MADE WITH WARM WATER Re: 98 - 110 deg
F.
- Yeast must dissolve
thoroughly for proper carbonation. DON'T use yeast that is stale, old, or has
been left open; THROW IT AWAY! Use FRESH yeast only.
- Water
temperature should be lukewarm to the touch - neither too hot nor too cold!
Proper
temperature is 98-110F.
- Low or no carbonation is usually caused by too little or old yeast, too
hot or cold water.
- Excessive foaming is
caused by too much yeast.
