Quick Disconnect Hose Connector - Female With these quick disconnect, life is easier and safer. No buttons to press, just turn and pull or push and turn. All fittings are 1/2" barb or thread. They do not have any shutoff feature, so no fluid should be in your lines when breaking connections Able to withstand boiling temperatures They are made from nylon and melt at 250 degrees so avoid direct flame exposure. Recomended on equipment side of connection Mates With item HBQCM

In Stock

HBQCM

Quick Disconnect Hose Connector - Male 1/2 Inch

Quick Disconnect Hose Connector - Male With these quick disconnect, life is easier and safer. No buttons to press, just turn and pull or push and turn. All fittings are 1/2" barb or thread. They do not have any shutoff feature, so no fluid should be in your lines when breaking connections Able to withstand boiling temperatures They are made from nylon and melt at 250 degrees so avoid direct flame exposure. Recomended on hose side of connection Mates With item HBQCF

In Stock

FTBE500

Siphontap

Siphontap A tool designed to rack (transfer) cooled wort from the kettle into the fermenter. The Siphontap strains a significant amount of hops and trub. After transfer is completed, there is just enough wort left in the bottom of the Siphontap to allow a hydrometer reading. Just insert the Siphontap into your wort and one gentle push starts the flow. It works great with the Siphon Spray Aerator on the other end of the transfer hose inside the fermenter. For use with 3/8 in ID turing.

In Stock

FTH985

Tubing - Silicone (1/2" ID) - By the Foot

Tubing - Silicone (1/2" ID) - By the Foot Translucent, food-grade tubing temperature rated to 500F. Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. It is kink resistant and will not delaminate. This tubing is not designed to hold pressures above 20psi. It works great with our magnetic drive pumps, but we do not recommend it with a impeller pump or for use with household water pressure. 1/2" ID * 3/4" OD * Will burst at 30 PSI at 70F. 1/2" ID 3/4" OD 30 PSI Burst at 70F This also often spelled as Silicon Tubing without the e.

In Stock

FTBE510

Siphon Spray Wort Aerator

Siphon Spray Wort Aerator Increase dissolved oxygen in your wort without having to rock or shake a heavy fermenter. Attach this aerator/diffuser to the end of your transfer tubing when filling your fermenter. Works well by itself or in conjunction with the FXBE500 Siphontap.

In Stock