TAP-A-DRAFT HOMEBREW STARTER KIT

Item Number: HBLTAPASTARTER

Unit Price: $62.93

In Stock

If out of stock 7-14 days Special Order

Quantity

Bookmark This Page
Refer this page to a friend

Detailed Description

TAP-A-DRAFT STARTER KIT Each Tap-A-Draft bottle holds 6 liters (1.6 gallons) of beer and fits perfectly on a standard refrigerator shelf. Three 6-liter bottles hold 4.75 gallons of beer. The dispensing tapping unit holds two eight-gram CO2 cartridges and features a preset regulator that dispenses the CO2 from the cartridges into the bottle at a steady rate. The bottles can be tapped for up to 6-8 weeks. These bottles are primed using 3 ounces of priming sugar per 5 gallons. After aging (3-4 weeks) remove cap, tap, and dispense. Two eight-gram CO2 cartridges will dispense the entire 6 liters. Tap-A-Draft bottles are reusable for at least 6 batches. This includes the Tap, drip tray, 10 eight-gram CO2 cartridges, and three 6-liter bottles. Everything you need to bottle and dispense 4.75 gallons of beer. Dimensions of bottles: Diameter: 7" Length of bottle: 12"; Length of bottle with dispense tap: 16" The Tap-A-Draft is an economical and space saving portable beer dispensing system. Three (BPA free)6 liter PET bottles hold 4.75 gallons of beer, virtually all of a 5 gallon batch. The Tap-A-Draft features a 6 liter BPA-free PET bottle, which screws onto the tapping unit for dispensing. The tapping unit holds two eight gram C02 cartridges, and features a preset regulator that dispenses the C02 from the two cartridges into the bottle at an even rate, so you can leave the unit for a month or two, and still dispense all the beer with the two eight gram cartridges (also used for seltzer bottles). When brewing beer for the Tap-A-Draft, prime the beer first by using 3 ounces of corn sugar per 5 gallon batch (about half a cup). Then fill the bottles and seal with the included 38mm screw caps. Let age like bottled beer until they are carbonated (this system will not artficially carbonate beer by C02 injection). To serve, remove the cap and screw on the Tap-A-Draft tapping head, insert two 8 gram C02 cartridges into the unit, chill and dispense. Two eight gram C02 cartridges will dispense the entire 6 liters of beer, and the built in regulator will keep pressure steady for up to two months. The 6 liter pet bottles are usable until they become damaged, usually for at least 6 batches. The pet bottles will keep beer fresh for 4 months. For longer beer storage, look to our Mini Keg Systems or full-sized Beverage systems. You will need 6 cartridges to dispense three bottles (4.75 gallons). A portable space-saving draft system at a great price Includes the Tap-A-Draft tap, drip tray, 10 eight gram C02 cartridges, and 3 six liter pet plastic bottles (with 3 caps). Everything you need to bottle and dispense 4.75 gallons of beer. The assembled unit with bottle and tap is 15" long, and 7.5" in diameter. The sealed bottles themselves are 12.5" long, and 7.5" in diameter. RESTRICTED SHIPPING- No shipments to Alaska, Hawaii, U.S. Possessions, or Military addresses, and ground shipment only to the lower 48 states.