Deluxe Immersion Wort Chiller for 5 gal kettler
Deluxe immersion type chiller; 24' coiled tubing with coils separated by looped copper wire, and a section of flexible tubing on each end; Fits hose tap fittings, diameter is 8.5" x 9" high.
Great for 5 gal partial boild kits in a 20 qt Kettle
NOTE: Come with standard hose adaptor theads, if you want to use this Wort Chiller on your kitchen sink faucet, you will need a faucet adaptor item CB6793
Use to reduce tubing size from 1/2 inch to 3/8 inch. This fitting is barb connected on both ends.
Able to withstand boiling temperatures
They are made from nylon and melt at 250 degrees
so avoid direct flame exposure.
Quick Disconnect Hose Connector - Female
With these quick disconnect, life is easier and safer. No buttons to press, just turn and pull or push and turn. All fittings are 1/2" barb or thread.
They do not have any shutoff feature, so no fluid should be in your lines when breaking connections
Able to withstand boiling temperatures
They are made from nylon and melt at 250 degrees
so avoid direct flame exposure.
Recomended on equipment side of connection
Mates With item HBQCM
Quick Disconnect Hose Connector - Male
With these quick disconnect, life is easier and safer. No buttons to press, just turn and pull or push and turn. All fittings are 1/2" barb or thread.
They do not have any shutoff feature, so no fluid should be in your lines when breaking connections
Able to withstand boiling temperatures
They are made from nylon and melt at 250 degrees
so avoid direct flame exposure.
Recomended on hose side of connection
Mates With item HBQCF
HomeBrew4Less.com LLC, 890 Lincoln Way
W, Chambersburg, PA 17202
(717) 504-8534
Store Hours Tue to Sat 11:30 am to 5:30 pm
Telephone Support 8 am to 8 pm
*** We only ship within the United States. ***
The American Homebrewers Association (AHA) is committed to promoting the community of homebrewers and empowering homebrewers to make the best beers in the world. Join today!